| Search / Korean Journal of Chemical Engineering |
HWAHAK KONGHAK,
Vol.35, No.2, 300-306, 1997
Vol.35, No.2, 300-306, 1997
기체유동층의 스플래쉬 영역에서 축방향 고체체류량 분포의 감쇄상수에 대한 온도의 영향
Effect of Temperature on the Decay Constant of the Axial Solid Holdup Profile in the Splash Region of a Gas Fluidized Bed
직경 0.1m, 높이 2.1m의 전기가열방식의 유동층에서 층물질로 모래를 사용하여 온도(24-600℃) 및 기체유속(0.5-2.0m/s)의 변화에 따른 전이영역에서 촉방향 고체체류량 분포의 감쇄상수를 측정하였다. 전이영역에서 고체체류량 분포의 감쇄상수는 유속이 증가함에 따라 감소하였고, 유속의 영향은 온도가 증가할수록 완만해지는 경향을 보였다. 일정유속에서 감쇄상수는 온도가 증가함에 따라 증가하였으며, 온도의 영향은 유속이 증가함에 따라 증가하였다. 본 연구의 결과와 타연구자들의 결과를 사용하여 감쇄상수에 대한 온도의 영향이 고려된 다음의 상관식을 제시하였다.
adp=exp(-11.2+210dp/(Dt-dp))(dpρg(U-Umf)/μ)-0.492[ρpgdp/ρg(U-Umf)2]0.725((ρp-ρg)/ρg)0.731CD-1.47
adp=exp(-11.2+210dp/(Dt-dp))(dpρg(U-Umf)/μ)-0.492[ρpgdp/ρg(U-Umf)2]0.725((ρp-ρg)/ρg)0.731CD-1.47
Effects of temperature(24-600℃) and gas velocity(0.5-2.0m/s) on the decay constant of axial solid holdup profile of the splash region have been measured in a gas fluidized bed(0.1m-i.d., 2.1m height) equipped with an electric heater. Sand was used as a bed material. The decay constant of axial solid holdup profile in the splash region decreased with an increase of the gas velocity. As the temperature increased, the effect of the temperature on the decay constant increased as the gas velocity increased. Based on results of this study and previous studies, a correlation on the decay constant that considers the effect of temperature was proposed as follows :
adp=exp(-11.2+210dp/(Dt-dp))(dpρg(U-Umf)/μ)-0.492[ρpgdp/ρg(U-Umf)2]0.725((ρp-ρg)/ρg)0.731CD-1.47
adp=exp(-11.2+210dp/(Dt-dp))(dpρg(U-Umf)/μ)-0.492[ρpgdp/ρg(U-Umf)2]0.725((ρp-ρg)/ρg)0.731CD-1.47
[References]
- Li Y, Kwauk M, "Fluidization III," edited by Grace, J.R. and Matsen, J.M., Plenum Press, New York, 537, 1980
- Kunii D, Levenspiel O, Powder Technol., 61, 193, 1990
- Adanez J, Gayan P, Garcialabiano F, Dediego LF, Powder Technol., 81(3), 259, 1994
- Cho YJ, Namkung W, Kim SD, Park SW, J. Chem. Eng. Jpn., 27(2), 158, 1994
- Kunii D, Levenspiel O, "Fluidization Engineering," 2nd ed., Butterworth-Heinemann, 64, 1991
- Wen CY, Yu YH, AIChE J., 12, 610, 1966
- Lee GS, Kim SD, Powder Technol., 62, 207, 1990
- Choi JH, Choi KB, Kim P, Shun DW, Kim SD, HWAHAK KONGHAK, 33(5), 580, 1995
- Arena U, Malandrino A, Marzocchella A, Massimilla L, "Circulating Fluidized Bed Technology III," edited by Basu, p., Horio, M. and Hasatami, M., Pergamon Press, Oxford, 137, 1990
- Arena U, Cammarota A, Marzocchella A, Massimilla L, Proc. of the 12th Int. Conf. on Fluidized Bed Combustion, 899, 1993
- Bai DR, Jin Y, Yu ZQ, Zhu JX, Powder Technol., 71, 51, 1992
- Choi JH, Kim KJ, Kim P, HWAHAK KONGHAK, 32(3), 489, 1994
- Choi JH, Park JH, Choung WM, Kang Y, Kim SD, Korean J. Chem. Eng., 12(2), 141, 1995
- Hartge EU, Li Y, Werther J, "Circulating Fluidized Bed Technology," edited by Basu, P., Pergamon Press, Toronto, Ont., 153, 1986
- Horio M, Morishita K, Tachibana O, Murata M, "Circulating Fluidized Bed Technology II," edited by Basu, P. and Large, J.F., Pergamon Press, Oxford, 147, 1988
- Kato K, Shibasaki H, Tamura K, Wang C, Takarada T, "Fluidization '87: Korea and Japan, Proc. 1st Korea-Japan Symp. on Fluidization," PangHan Pub. Co., Seoul, 229, 1987
- Kato K, Takarada T, Tamura T, Nishino K, "Circulating Fluidized Bed Technology III," edited by Basu, P., Horio, M. and Hasatami, M., Pergamon Press, Oxford, 145, 1990
- Li J, Tung Y, Kwauk M, "Circulating Fluidized Bed Technology II," edited by Basu, P. and Large, J.F., Pergamon Press, Oxford, 193, 1988
- Werther J, Hartge EU, Kruse M, Powder Technol., 70, 293, 1992
[Cited By]
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.