About The Journal
  Aims and Scope
  Editorial Board
  Submit a Manuscript 
  Subscription Information
Articles & Issues
  Issue
  Search
For Authors
  Instructions to Authors
  Ethics in Publishing
  Peer Review Process
  Author's Checklist
  Copyright Transfer Form
Contact us
 
 
 
 
Search / Korean Journal of Chemical Engineering
HWAHAK KONGHAK,
Vol.34, No.6, 735-741, 1996
순환유동층에서 입자의 크기변화에 따른 츰밀도의 변화특성
The Effect of Particle Size on the Suspension Density in a Circulating Fluidized Bed
안귀룡, 한귀영
순환유동층의 조업에 중요한 영향을 미치는 고체입자의 농도분포에 대한 고체입자 크기의 영향을 살펴보았다. 본 연구에 사용된 순환유동층은 직경 50 mm, 높이 2500mm였다. 사용된 입자는 크기가 다른 모래였으며 각각의 평균 직경은 147, 280㎛이었다. 기체의 유속범위는 3-5.5 m/s, 입자순환량은 10-100kg/㎡.s이었으며 이때 압력강하로부터 측정된 suspension density는 10-80kg/㎥, 입자의 크기변화 및 기체유 속의 변화에 따른 고체입자의 국부적 그리고 평균 농도분포의 변화를 관찰할 수 있었으며, 순환유동층의 조업변수들로부터 평균 입자농도를 예측할 수 있는 상관관계식을 제시하였다.
An experimental investigation was carried out to determine the effect of particle size and gas velocity on the suspension density in a circulating fluidized bed. The experimental test section has the dimension of 50 mm ID X 2500mm height and two different sizes of sand(147,280㎛) were employed as the bed material. The operating conditions of gas velocity and solid circulation rate were in the ranges of 3.0-5.5 m/s and 10-100kg/㎡·s, repectively and the corresponding on the suspension density with different size of sand particle was observed. A correlation was proposed to predict the crosssectional averaged suspension density with the operating variables.
Keywords: Circulating Fluidized Bed; Suspension Density; Axial Profile; Particle Size Effect
[References]
  1. Square AM, Proc. 1st Int. Conf. on CFB, Halifax, Canada, 1, 1986
  2. Reh L, Chem. Ing. Prog., 67, 58, 1970
  3. Kunii D, Levenspiel O, "Fluidization Engineering," 2nd ed., Butterworth-Heinemann, 1991
  4. Yerusalmi J, Tuner DH, Squires AM, Ind. Eng. Chem. Process Des. Dev., 15, 47, 1976
  5. Hartge EU, Li Y, Werther J, Proc. 1st Int. Conf. on CFB, Halifax, Canada, 153, 1986
  6. Cho YJ, Namkung W, Kim SD, Park SW, J. Chem. Eng. Jpn., 27(2), 158, 1994
  7. Rhode MJ, Geldart D, Powder Technol., 53, 155, 1987
  8. Kato K, Shibasaki H, J. Chem. Eng., 22, 205, 1989
  9. Arena U, Cammaroto A, Pistone L, Proc. 1st Int'l Conf. on CFB, Halifax, Canada, 119, 1986
  10. Bai DR, Jin Y, Yu ZQ, Zhu JX, Powder Technol., 71, 51, 1992
  11. Glicksman LR, Chem. Eng. Sci., 39, 1373, 1984
  12. Basu P, Nag PK, Int. J. Heat Mass Transf., 30, 2397, 1987
  13. Chen CC, Chen CL, Chem. Eng. Sci., 47, 1017, 1992
  14. Hirama T, Takeuchi H, Chib T, Powder Technol., 70, 207, 1992
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.