Search / Korean Journal of Chemical Engineering
HWAHAK KONGHAK,
Vol.40, No.6, 725-728, 2002
촉매 코팅방법에 따른 기능성여과포의 NO 제거 반응 특성
Effects of Catalyst Coating Methods on NO Removal Characteristics of Functional Fabric Filters
NOx와 먼지 동시 제거용 기능성 여과포 개발의 일환으로 V2O5/TiO2 계열의 상용촉매를 사용하여 P-84, Nomex, PTFE 여과포에 코팅하였다. 사용된 코팅 방법은 Sol-gel법, Spray 법 그리고 Dip 코팅 방법이었으며 코팅방법이 여과포의 NOx 제거 반응에 미치는 영향을 조사하였다. NOx 제거반응실험은 여과포의 작동온도에 맞는 100-250 ℃의 반응온도범위에서, 공간속도 5,000 hr(-1), 산소농도 6%, NH3/NO 몰비는 1.0의 조건하에서 수행되었다. 본 연구에서 시도된 세 가지 코팅 방법 중 촉매량의 조절 및 균일한 코팅이 용이한 Sol-gel법에 의해 제조된 기능성여과포가 가장 좋은 NOx 전환율을 나타냈다.
A series of fabric filters including P-84, Nomex and PTFE were coated with a commercial V2O5/TiO2 catalyst as an effort to develop a functional fabric filter of simultaneous removal of dust and NOx. The coating methods employed are sol-gel coating method, spray coating method and dip coating method, and the effects of coating method on NOx removal performance of functional fabric filter were investigated. Experimental conditions are as follows: the temperatures of 100-250 ℃ which are the normal operating temperature range of fabric filters, the space velocity of 5,000 hr (-1), the oxygen concentration of 6%, and the NH3/NO ratio of 1.0. Results showed that the sol-gel coating method gave the best NOx removal performance mainly due to its ability in controlling the amount of catalyst and uniform coating.
[References]
  1. Kim YS, Kyoung NH, Sun DW, Jo SH, KIER Report, KE-91049G, 105, 1991
  2. Kim YS, Kyoung NH, Sun DW, Jo SH, Im JW, KIER Report, KE-92059G, 110, 1992
  3. Kang SH, 21c Energy Technology Workshop Proceeding, 45, 1990
  4. Choi WK, Lee IC, Choi IS, Chem. Ind. Technol., 6(4), 446, 1988
  5. Bosch H, Janssen F, Catal. Today, 2, 369, 1988
  6. Nakatsuj T, Miyamoto A, Catal. Today, 10, 21, 1991
  7. Voorhoeve RJH, Trimble LE, J. Catal., 38, 80, 1975
  8. Inoue S, Tsumaki H, Kitamura T, Kasaoka S, Kobayashi H, Nagi H, Int. Chem. Eng., 17, 282, 1977
  9. Andersen HC, Green WJ, Steele DR, Ind. Eng. Chem., 53, 199, 1961
  10. Markvart M, Pour V, Int. Chem. Eng., 15, 546, 1975
  11. Bartholomew CH, Ind. Eng. Chem. Prod. Res. Dev., 14, 29, 1975
  12. Foley JM, Katzer JR, Manogue WH, Ind. Eng. Chem. Prod. Res. Dev., 18, 170, 1979
  13. Otto K, Shelef M, Kummer JT, J. Phys. Chem., 75, 875, 1971
  14. Kobylinski TP, Taylor BW, J. Catal., 33, 376, 1974
  15. Wong WC, Nobe K, Ind. Eng. Chem. Prod. Res. Dev., 25, 179, 1986
  16. Park YO, Im JW, Kim SD, Choi HK, Clean Energy Technology Development 3rd Year Final Report, 31, 1999