Search / Korean Journal of Chemical Engineering
HWAHAK KONGHAK,
Vol.32, No.3, 483-488, 1994
수용액중의 Cr(VI) 이온 제거에서의 침전부상법과 흡착콜로이드부상법의 비교
Comparison of the Precipitate Flotation and the Adsorbing Colloid Flotation on the Removal of Cr(VI) from Aqueous Solution
수용액중의 Cr(VI)이온제거를 음이온 계면활성제 sodium lauryl sulfate 를 사용하여 거품분리기술(침전부상법, 흡착콜로이드부상법)을 이용하여 행하였다. Cr(VI)이온제거의 최적 pH는 침전부상법은 pH 8.0 근처에서 흡착콜로이드부상법은 Fe(OH)3를 사용하는 경우 pH 4.0 근처에서 나타났다. Cr(VI) 이온 제거효율에 영향을 미치는 인자들인 계면활성제, Fe(III)이온, 외부 이온 등의 영향에 대해 조사하였다. 수용액중의 Cr(VI) 이온 제거에 있어서 침전부상법과 흡착부상법의 흡착기구 및 분리 메카니즘을 비교하여 관찰하였다.
Experimental investigations on the removal of Cr(VI) from aqueous solution were carried out by the foam separation techniques (precipitate and adsorbing colloid flotation) using sodium lauryl sulfate as a collector. The optimum pH for the removal of Cr(VI) was found to be about 8 for precipitate flotation and about 4 for adsorbing colloid flotation with Fe(OH)3. The effect of surfactant and foreign ions(Na+, Ca2+, NO3-, SO42-) addition on the removal efficiency were observed. The adsorption and separation mechanism on the removal of Cu(II) ion by the foam separation techniques of precipitate and adsorbing colloid flotation were also observed.
[References]
  1. Lemlich R, "Adsorptive Bubble Separation Techniques," Academic Press, New York, 1972
  2. Clake AN, Wilson DJ, Sep. Purif. Methods, 7(1), 55, 1978
  3. Grives RB, Chem. Eng., 10, 93, 1975
  4. Somasundaran P, Sep. Purif. Methods, 1(1), 117, 1972
  5. Wilson DJ, Clarke AN, "Foam Flotation," Marcel Dekker, Inc., New York, 1983
  6. Barson RE, Ray CI, Amer. Inst. of Mining, Metallurgical and Petroleum Engineers Symposium, Dallas, Texas, 1963
  7. Rubin AJ, Johnson JD, Lamb JC, Ind. Eng. Chem. Process Des. Dev., 5(4), 368, 1966
  8. Pinford TA, "Pricipitate Flotation in Adsorptive Bubble Separation Techniques," Lemlich, R. (ed.), Academic, New York, 1972
  9. Grieves RB, Bhattacharyya D, Sep. Sci., 4(4), 301, 1969
  10. Jurkiewicz K, Sep. Sci. Technol., 19(13), 1051, 1984
  11. Kim YS, Zetlin H, Anal. Chem., 43, 1390, 1971
  12. Kim YS, Zetlin H, Sep. Sci., 7(1), 1, 1972
  13. Huang SD, Wilson DJ, Sep. Sci., 10(4), 407, 1975
  14. Huang SD, Wilson DJ, Sep. Sci., 11(3), 215, 1976
  15. Wilson DJ, Sep. Sci. Technol., 13(2), 107, 1978
  16. Allen WD, Jones MM, Mitchell WC, Wilson DJ, Sep. Sci. Technol., 14(9), 769, 1979
  17. McIntyte G, Rodriguez JJ, Sep. Sci. Technol., 17(2), 359, 1982
  18. McIntyte G, Rodriguez JJ, Sep. Sci. Technol., 17(5), 673, 1982
  19. McIntyte G, Rodriguez JJ, Thackston EL, Wilson DJ, Sep. Sci. Technol., 17(5), 683, 1982
  20. Huang SD, Tzudo JJ, Gau JY, Hsieh HS, Fann CF, Sep. Sci. Technol., 19(13-15), 1061, 1984
  21. Choi SJ, Ihm SK, Sep. Sci. Technol., 23(4-5), 363, 1988
  22. Bhattacharyya DJ, Carton A, Grieves RB, Am. Inst. Chem. Eng. J., 17, 419, 1971
  23. Pietrenko BK, Selecki A, Sep. Sci. Technol., 19(13), 1025, 1984
  24. Huang SD, Fann CF, Hsieh HS, J. Colloid Interface Sci., 89(2), 504, 1982
  25. Huang SD, Wilson DJ, Sep. Sci. Technol., 19(8), 603, 1984
  26. Franson MH, "Standard Methods for the Examination of Water and Wastewater," Amer. Publ. Health Assoc., Washington, D.C., 1971
  27. Cross J, "Surfactant Science Series," 8, Dekker, New York, 1977
  28. Parks GA, Chem. Res., 65, 177, 1965