Print: | ISSN 0304-128X |
Online: | ISSN 2233-9558 |
HWAHAK KONGHAK,
Vol.40, No.1, 128-132, 2002 성형조건에 따른 무연탄계 활성탄의 세공특성
Pore Characteristics of Anthracite-based Activated Carbon According to Granulation Process
본 연구는 무연탄으로 활성탄을 제조할 경우 성형이 세공특성에 미치는 효과를 고찰한 것이다. 3가지 다른 방법으로 활성탄(파쇄형 활성탄, 압축성형 활성탄, 압축성형 활성탄)을 제조하여 특성을 비교했다. 이중에서 25%의 콜타르와 7%의 물을 혼합하여 압출 성형한 활성탄의 비표면적, 세공부피, 그리고 경도에서 가장 좋은 물성을 나타내었다. 압축 및 압출 성형체의 표면은 무연탄 원탄과는 달리 무연탄 분말이 바인더와 혼합되어 있으므로 매우 거진 상태를 나타내었고, 활성화시 거칠게 형성되어 있는 입자사이로 활성화제인 수증기가 쉽게 침투하여 많은 세공을 형성시킴을 알 수 있었다. 이렇게 형성된 세공을 통해 수증기 활성화반응이 잘 일어나 직경 3,000-50,000 Å 범위의 거대세공이 발달하였다. 파쇄형 활성탄에 비해 약 2배의 거대세공(macropore)부피를 가지고 있었으며 경도도 30%에서 95% 이상으로 상승되었다.
This study was to investigate the effect of granulation process on pore characteristics in manufacturing anthracitebased activated carbons. The activated carbons were made by three different methods to compare characteristics: the crushed activated carbon, the compressed activated carbon, and the extruded activated carbon. Among these activated carbons, the
extruded activated carbon using a binder that consists of 25% coal tar and 7% water showed the best characteristics in specific surface area, pore volume, and hardness. Since the compressed and the extruded substances had coarser surfaces than a raw material, steam could penetrate easily through particles and produce macropores especially in the diameter ranges of 3,000-
50,000 Å during activation process. The extruded activated carbon showed about twice more macropore volumes than the crushed activated carbon and the hardness was increased from 30% up to 95%.
[References]
|