Search / Korean Journal of Chemical Engineering
HWAHAK KONGHAK,
Vol.39, No.4, 456-464, 2001
난류유동층에서 고속유동층으로의 전이유속에 대한 온도의 영향
Effect of Temperature on Transition Velocity from Turbulent Fluidization to Fast Fluidization in a Gas Fluidized Bed
난류유동층에서 고속유동층으로의 전이유속에 미치는 온도의 영향을 고찰하기 위해 층물질로 모래(평균입경:0.256 mm, 입자밀도: 2,617 kg/m(3))를 사용한 고온 순환유동층(내경 0.02 m, 높이 2.0 m)에서 emptying time method에 의해 고속유동층으로의 전이유속(U(tr))을 측정 및 고찰하였다. 측정된 고속유동층으로의 전이유속은 온도가 증가함에 따라 증가하였다. 본 실험의 측정값 및 문헌의 보고들과 기존 상관식을 비교하였으며 기존 상관식들 중 Chehboumi 등 [19]의 상관식이 측정값들과 가장 유사한 결과를 나타내었다.
Transition velocity from turbulent to fast fluidization has been measured by emptying time method in a high tem-perature circulating fluidized bed(0.02 m i.d. and 2.0 m high) of sand particle(specific surface mean diameter: 0.256 mm, particle density: 2,617 kg/m(3)) with variation of temperature(15-600 ℃). Measured transition velocity from turbulent to fast fluidization increased with increasing temperature. The previous correlations on transition velocity to fast fluidization compared with the meas-ured values. Among the previous correlations, correlation of Chehbouni et al.[19] shows relatively good results.
[References]
  1. Arnaldos J, Casal J, Powder Technol., 86(3), 285, 1996
  2. Bi HT, Ellis N, Abba IA, Grace JR, Chem. Eng. Sci., 55(21), 4789, 2000
  3. Lewis WK, Gilliland ER, Bauer WC, Ind. Eng. Chem., 41, 1104, 1949
  4. Yerushalmi J, Turner DH, Squires AM, Ind. Eng. Chem. Proc. Des. Dev., 15, 47, 1976
  5. Avidan A, Yerushalmi J, Powder Technol., 32, 223, 1982
  6. Schnitzlein MG, Weinstein H, Chem. Eng. Sci., 46, 2605, 1988
  7. Yerushalmi J, Cankurt NT, Powder Technol., 24, 187, 1979
  8. Horio M, Nishimuro M, Ishii H, Proc. of the 3rd SCEJ Symp. on Circulating Fluidized Beds, 54, 1989
  9. Bi HT, Jiang PJ, Fan LS, AIChE Meeting, Paper no. 101d, Los Angeles, 1991
  10. Jiang PJ, Fan LS, AIChE Meeting, Paper#101e, Los Angeles, CA, 1991
  11. Horio M, Ishii H, Nishimuro M, Powder Technol., 70, 229, 1992
  12. Adanez J, de Diego LF, Gayan P, Powder Technol., 77, 61, 1993
  13. Tsukada M, Nakanishi D, Horio M, 4th Int. Conf. on Circulating Fluidized Beds Preprint volume, 248, 1993
  14. Chen B, Li Y, Wang F, Wang S, Kwauk M, Chem. Mater-lurgy, 4, 20, 1980
  15. Li Y, Kwauk M, "Fluidization," edited by Grace, JR and Matsen, JM, Plenum Press, New York, 537, 1980
  16. Kwauk M, Wang N, Li Y, Chen B, Shen Z, "Circulating Fluidized Bed Technology," edited by Basu, P., Pergamon Press, Toronto, 33, 1985
  17. Perales JF, Coll T, Llop MF, Puigjaner L, Arnaldos J, Cassal J, "Circulating Fluidized Bed Technology III," edited by Basu, P., Horio, M. and Hasatani, M., Pergamon Press, New York, 73, 1990
  18. Chehbouni A, Chaouki J, Guy C, Klvana D, Ind. Eng. Chem. Res., 33(8), 1889, 1994
  19. Chehbouni A, Chaouki J, Guy C, Klvana D, Can. J. Chem. Eng., 73(1), 41, 1995
  20. Leu LP, Huang JW, Gua BB, Proc. Asian Conf. on Fluidized Bed and Three-Phase Reactors, Beijing, China, 71, 1990
  21. Yang YR, Rong SX, Chen GT, Chen BC, Chem. Reac. Eng. Technol., 6, 9, 1990
  22. Namkung W, Kim SW, Kim SD, Chem. Eng. J., 72(3), 245, 1999
  23. Lee JS, Kim SD, HWAHAK KONGHAK, 20(3), 207, 1982
  24. Shin BC, Koh YB, Kim SD, HWAHAK KONGHAK, 22(5), 253, 1984
  25. Han GY, Lee GS, Kim SD, Korean J. Chem. Eng., 2(2), 141, 1985
  26. Delebarre A, Bitaud B, Regnier MC, Powder Technol., 91(3), 229, 1997
  27. Le Palud T, Zenz FA, "Fluidization," edited by Grace, J.R., Shemilt, L.W. and Bergougnou, M.A., Engineering Foundation, New York, 121, 1989
  28. Bi HT, Grace JR, Zhu JX, Transactions Institution Chem. Eng., 73, 154, 1995
  29. Yi CK, Son JE, Jin GT, Shun DW, Park JH, Han KH, Jo SH, Lee SY, "Solid Circulation Technology for the Stable Operation of a Hot Gas Desulfurization Bench-Scale Unit," Research Report, KIER994613, 17, 1999
  30. Lee GS, Kim SD, Powder Technol., 62, 207, 1990
  31. Bi HT, Fan LS, AIChE J., 38(2), 297, 1992
  32. Choi JH, Son JE, Kim SD, J. Chem. Eng. Jpn., 22, 597, 1989
  33. Son JE, Choi JH, Kim SD, "Fluidization VI," edited by Grace JR, Shemilt LW and Bergougnou MA Engineering Foundation, 113, 1989
  34. Merrick D, Highley J, AIChE Symp. Ser., 70, 366, 1974
  35. Lee JK, Hu CG, Shin YS, Chun HS, Can. J. Chem. Eng., 68, 824, 1990
  36. Park SS, Choi YT, Lee GS, Kim SD, "Circulating Fluidized Bed Technology," edited by Basu, P., Horio M and Hasatani M, Pergamon Press, Oxford, 497, 1990
  37. Lee WJ, Cho YJ, Kim JR, Kim SD, Proc. 3rd Asian Conf. on Fluidized-Bed and Three-Phase Reactors, 126, 1992
  38. Wen CY, Chen LH, Proc. 6th Int. Conf. on FBC, III, 1115, 1980
  39. Romanova TT, Deposited Doc., Viniti 5129-80, 1980
  40. Milne BJ, Berruti F, Behie LA, Theo JW, Proc. 4th Int. Conf. on CFB, 29, 1993
  41. Zhang X, Cao Y, Ren Y, Chen J, Hong Y, Proc. 8th Int. Conf. on FBC, I, 75, 1985
  42. George SE, Grace JR, Can. J. Chem. Eng., 59, 279, 1981
  43. Choi JH, Choi KB, Kim P, Shun DW, Kim SD, HWAHAK KONGHAK, 33(5), 580, 1995
  44. Ryu HJ, Choi JH, HWAHAK KONGHAK, 35(2), 173, 1997
  45. May WG, Russel FR, paper presented at the North Jersey section of the A.C.S.(Jan. 25, 1954), 1954
  46. Zenz FA, Weil NA, AIChE J., 4, 472, 1958
  47. Chan IH, Knowlton TM, "Fluidization," edited by Kunii, D. and Toei, R., Engineering Foundation, 283, 1984
  48. Knowlton TM, "Fluidization VII," edited by Potter, O.E. and Niclin, D.J., 27, 1992
  49. Knowlton TM, Findlay J, Sishtla C, Final Report, DOE/MC/22061-2883, DE90 009699, 1990
  50. Li J, Li Y, Kwauk M, "Circulating Fluidized Bed Technology II," edited by Basu P and Large JF, Pergamon Press, Toronto, 75, 1988