Search / Korean Journal of Chemical Engineering
HWAHAK KONGHAK,
Vol.22, No.1, 35-42, 1984
Disk-Doughnut형 맥동탑내에서의 액적입경 분포와 체유량
Drop-size Distribution and Holdup in a Pulsed Disk-Doughnut Extraction Column
Disk-doughnut판을 충전한 맥동추출탑내에서의 분산상의 체유량과 액경분포를 고찰하였다. 맥동탑의 내부직경은 46.6 mm, 판간거리는 25 mm, 1 mm 두께의 304 스테인레스 스틸로 제작된 disk판과 doughnut판은 각각 23 %의 자유면적을 갖고 총 48개의 판으로 충전되어 있으며 130 cm 유효높이의 기하학적 제원을 갖는 장치를 사용하였다.
연속상으로는 일차중류수를, 분산상으로는 methyl-isobutyl-ketone(이하 MIBK로 칭함)의 단일계를 사용하였으며 맥동진폭, 진동수 및 각 상의 유량의 변화에 따른 체유량 및 액경분포를 고찰하였다. 낮은 진동에너지에서는 위치에 따른 국부 체유량값이 거의 일정하였으나 진동에너지가 증가할수록 탑의 중간위치에서 국부체유량값이 최대가 되었고 Flooding이 일어나기 직전의 진동에너지에서는 하단부에서 최대의 국부체유량값을 나타내었으며, 실험조건의 범위내에서는 평균체유량이 연속상의 유속에 무관함을 알 수 있었다. 한편 분산상의 평균액경(Sauter mean dia.)은 Upper-limit law에 의하여 비교적 근사하게 나타낼 수 있었다.
Two important hydrodynamic parameters, hold up and drop size were studied in a disk-doughnut plate extraction column. The column was 46.6 mm in diameter(I.D) and contained 48 plates with 25 mm plate spacing. Stainless steel made plate(1 mm thickness) has a 23 % free area. Methyl-isobutyl-ketone was used as the dispersed phase with water as the continuous phase.
According to the intensity of pulse energy, three different patterns of local holdup were shown. Within the operating conditions. The effect of the continuous superficial velocity on mean hold up can safely be ignored.
Upper-limit law can fairly well describe the experimentally obtained drop size distribution