Search / Korean Journal of Chemical Engineering
Korean Chemical Engineering Research,
Vol.53, No.5, 614-619, 2015
감압 상태 순환유동층 반응기에서 플라즈마 그래프팅에 의한 미세입자 표면 개질
Surface Modification of Fine Particle by Plasma Grafting in a Circulating Fluidized Bed Reactor under Reduced Pressure
미세입자의 플라즈마 표면 개질을 감압상태하의 순환유동층 반응기에서 수행하였다. 플라즈마에 의해 처리된 폴리스타이렌 입자는 폴리에틸렌글리콜로 표면에 그래프팅하였다. 표면 개질 전 입자와 플라즈마 처리된 입자 그리고 그래프팅된 입자의 특성은 각각 DPPH 방법, FTIR, SEM 그리고 접촉각 측정으로 분석하였다. 플라즈마 처리된 폴리스 타이렌 입자의 표면에 과산화물이 잘 형성되었다. 또한, 폴리에틸렌글리콜의 그래프팅 중합에 의해 플라즈마 처리된 입자 표면에 그래프팅이 잘 분산되었다. 따라서 감압상태의 순환 유동층 반응기에서 플라즈마 처리에 의한 PEG-g-PS 입자를 성공적으로 형성할 수 있었다.
A plasma surface modification of powders has been carried out in a circulating fluidized bed reactor under reduced pressure. Polystyrene (PS) particles treated by plasma are grafted with polyethylene glycol (PEG) on the surface. The virgin, plasma-treated and grafted powders were characterized by DPPH method, FTIR, SEM and contact angle meter. The plasma-treated PS powders have well formed peroxide on the surface, By PEG grafting polymerization, PEG is well grafted and dispersed on the surface of the plasma-treated PS powders. The PEG-g-PS particle was successfully synthesized using the plasma circulating fluidized bed reactor under reduced pressure.
[References]
  1. McGinty KM, Brittain WJ, Polymer, 49(20), 4350, 2008
  2. Nie FQ, Xu ZK, Ye P, Wu J, Seta P, Polymer, 45(2), 399, 2004
  3. Park BD, Lee YS, React. Funct. Polym., 44, 41, 2000
  4. Jo S, Park K, Biomaterials, 21, 605, 2000
  5. Qui YX, Klee D, J. Appl. Polym. Sci., 61, 2372, 1996
  6. Suzuki M, Kishida A, Iwata H, Ikada Y, Macromolecules, 19, 1804, 1986
  7. Fujimoto K, Takebayashi Y, Inoue H, Ikada, J. Polym. Sci. Pol. Chem., 31, 1035, 1993
  8. Kim HY, Yashuda HK, J. Biomed. Mater. Res., 48, 135, 1999
  9. Zhang F, Kang ET, Neoh KG, Wang P, Tian KL, J. Biomed. Mater. Res., 56, 324, 2001
  10. Yim EC, Kim SJ, Oh IK, Kee CD, Korean Chem. Eng. Res., 51(3), 388, 2013
  11. Yu HY, Tiang ZQ, Huang L, Gheng G, Li W, Zhou J, Yan MG, Gu JS, Wei XW, Water Res., 42, 4341, 2008
  12. Gaiolas C, Belgacem MN, Silva L, Thielemans W, Costa AP, Nunes M, Silva MJS, J. Colloid Interface Sci., 330(2), 298, 2009
  13. Yasuda H, Yasuda T, J. Polym. Sci. A: Polym. Chem., 38(6), 943, 2000
  14. Ferrari B, Sanchez-Herencia AJ, Moreno R, Mater. Res. Bull., 33(3), 487, 1998
  15. Oh SM, Park DW, Korean J. Chem. Eng., 17(3), 299, 2000
  16. Jung SH, Park SH, Kim SD, J. Chem. Eng. Jpn., 37(2), 166, 2004
  17. Jung SH, Park SH, Lee DH, Kim SD, Polym. Bull., 47(2), 199, 2001
  18. Park SH, Kim SD, Colloids Surf. A: Physicochem. Eng. Asp., 133, 33, 1998
  19. Park SH, Kim SD, Polym. Bull., 33(2), 249, 1994
  20. Gref R, Luck M, Quellec P, Marchand M, Dellacherie D, Harnisch S, Blunk T, Muller RH, Colloids Surf. B: Biointerfaces, 18, 301, 2000
  21. Feng LB, Zhou SX, You B, Wu LM, J. Appl. Polym. Sci., 103(3), 1458, 2007
  22. Appendini P, Hotchkiss JH, J. Appl. Polym. Sci., 81(3), 609, 2001
  23. Song LH, Park SH, Jung SH, Kim SD, Park SB, Korean J. Chem. Eng., 28(2), 627, 2011
  24. Song LH, “Surface Modification of Polystyrene by Plasma Grafting of PEG in a Fluidized Bed Reactor,” MS. Thesis, KAIST, Korea (2002).
  25. Park SH, “Study on Plasma Surface Grafting Modification of Fine Particle in a Circulating Fluidized Bed Reactor,” KOSEF report, R05-2002-000-0129-0(2004).
  26. Lee SH, Hsiue GH, Kao CH, Chang PCT, Biomaterials, 17, 587, 1996