About The Journal
  Aims and Scope
  Editorial Board
  Submit a Manuscript 
  Subscription Information
Articles & Issues
  Issue
  Search
For Authors
  Instructions to Authors
  Ethics in Publishing
  Peer Review Process
  Author's Checklist
  Copyright Transfer Form
Contact us
 
 
 
 
Search / Korean Journal of Chemical Engineering
Korean Chemical Engineering Research,
Vol.51, No.6, 685-691, 2013
반응표면분석법을 이용한 이부프로펜의 분쇄공정변수의 최적화
Optimization of Process Variables for Grinding of Ibuprofen using Response Surface Methodology
심철호
이부프로펜은 비스테로이드성 소염진통제(Non-Steroidal Anti-Inflammatory Drugs; NSAIDs)의 대표적인 성분이다. 이부프로펜은 결정성이 크기 때문에 난용성이며, 따라서 생체이용률(bioavailability)도 낮다. 이와 같은 난용성을 개선하기 위해서는 이부프로펜의 입도를 감소시킬 필요가 있다. 본 연구의 목적은 이부프로펜의 분쇄조건을 최적화하는데 있다. 이부프로펜을 분쇄하기 위하여 유성밀을 사용하였으며, Box-Behnken 방법을 이용하여 분쇄변수들의 최적조건을 구하였다. 이부프로펜 분쇄생성물의 물성을 조사하기 위하여 입도, 결정크기 및 인장강도 측정에는 각각 입도분석기, XRD, tensile/compression tester를 사용하였다. 분쇄 최적조건은 밀회전수는 290 rpm, 시료장입량은 24.6 g, 분쇄시간은 10분이었으며, 이 조건에서 이부프로펜 분쇄생성물의 입도는 13.5 μm이었다. 이부프로펜은 분쇄 후 결정크기가 감소하였다. 이부프로펜 분쇄생성물의 정제의 상대밀도가 0.85~0.90인 범위에서 그 정제의 인장강도는 12~14 Kgf/cm2이었다.
Ibuprofen, non-steroidal anti-inflammatory drugs; NSAIDs, is a highly crystalline substance with the pharmaceutical properties of poor solubility and low bioavailability. The size reduction of ibuprofen is needed to improve the solubility. The objective of this study is to optimize the grinding condition of ibuprofen. Grinding of ibuprofen was carried out using a planetary mill. Grinding parameters were optimized using Box-Behnken experimental design method. The physical characteristics of ground ibuprofen were investigated for the particle size by particle size analyzer, for the crystal size by X-ray diffraction (XRD), and for the tensile strength by tensile/compression tester. The optimum conditions for the milling of ibuprofen were 290 rpm of the revolution number of mill, 24.6 g of the weight of sample, and 10 minutes of grinding time. The measured value of the particle size of ground ibuprofen at these optimum conditions was 13.5μm. The results showed that the crystal size of ibuprofen was reduced by the planetary milling process. In case the relative density of the tablets formulated of ground ibuprofen was range of 0.85~0.90, the tensile strength of them was range of 12~14 Kgf/cm2.
Keywords: Ibuprofen; Optimization; Response Surface Methodology; Box-behnken Method; Grinding
[References]
  1. Chaumeil JC, Meth. Find. Exp. Clin.Pharmacol., 20, 211, 1998
  2. Chiou WL, Riegelman S, J. Pharm. Sci., 60(9), 1281, 1971
  3. Hancock BC, Zografi G, J.Pharm. Sci., 86, 1, 1997
  4. Buckton G, Darcy P, Int. J.Pharm., 121, 81, 1995
  5. Briggner L, Buckton G, Bystrom K, Darcy P, Int. J. Pharm., 105, 125, 1994
  6. Choi WS, Kim HI, Kwak SS, Chung HY, Chung HY, Yamamoto K, Oguchi T, Tozuka Y, Yonemochi E, Terada K, Int. J. Miner. Process., 74S, S165, 2004
  7. Chung HY, Yonemochi E, Saitoh T, Terada K, Tozuka Y, Oguchi T, Yamamoto K, Chung HY, Choi WS, Int. J. Pharm., 255, 49, 2003
  8. Chung HY, Kwak SS, Kim HI, Choi WS, Yakhak Hoeji., 46(2), 102, 2002
  9. Yonemochi E, Oda K, Saeki S, Oguchi T, Nakai Y, Yamamoto K, Chem. Pharm. Bull., 42, 1948, 1994
  10. Okonogi S, Yonemochi E, Oguchi T, Puttipiparkhachorn S, Yamamoto K, Drug Dev. Ind. Pharm., 23, 1121, 1997
  11. Ueno Y, Yonemochi E, Tozuka Y, Yamamura S, Oguchi T, Yamamoto K, J. Pharm. Pharmocol., 50, 1, 1998
  12. Yonemochi E, Ueno Y, Ohmae T, Oguchi T, Nakajima S, Yamamoto K, Pharm. Res., 14, 802, 1997
  13. Cho HK, Rhee KY, Paik YN, Transactions of KSME-A., 29(7), 1022, 2005
  14. Hwang DH, Lee D, Lee H, Choe D, Lee SH, Lee K, Korean J. Chem. Eng., 27(4), 1087, 2010
  15. Lee K, Lee D, Lee H, Kim CK, Wu Z, Lee K, Korean J. Chem. Eng., 27(4), 1333, 2010
  16. Rawlinson CF, Williams AC, Timmins P, Grimsey I, Int. J. Pharm., 336, 42, 2007
  17. Rodriguez R, Alvarez-Lorenzo C, Concheiro A, Eur. J. Pharm. Sci., 20, 429, 2003
  18. Schiermeier S, Schmidt PC, Eur. J. Pharm. Sci., 15, 295, 2002
  19. Rasenack N, Steckel H, Muller BW, Powder Technol., 143-144, 291, 2004
  20. Kayrak D, Akman U, Hortacsu O, J. Supercrit. Fluids, 26(1), 17, 2003
  21. Mallick S, Pattnaik S, Swain K, De PK, Saha A, Ghoshal G, Mondal A, Eur. J.Pharm. Biopharm., 68, 346, 2008
  22. Mallick S, Pattnaik S, Swain K, De PK, Saha A, Mazumdar P, Ghoshal G, Drug Dev. Ind. Pharm., 34, 726, 2008
  23. Lee SH, Data Analysis of Engineering Statistics using Minitab, revision, Iretec Inc., Kunpo, ROK, 647, 2008
  24. Kim DS, Park YS, J. Korean Soc.Water Qual., 26(1), 35, 2010
  25. Sim CH, Food Engineering Progress., 15(2), 97, 2011
  26. Park SH, Design of Experiments, Minyoungsa, Seoul, 453, 2005
  27. Costa FO, Pais AACC, Sousa JJS, Int.J. Pharm., 270, 9, 2004
  28. Malvern, Sample Dispersion & Refractive Index Guide, version 3.1, Malvern Instruments Ltd., England, 2.1-2.14, 1997
  29. Kachrimanis K, Malamataris S, Europeon Journal of Pharmaceutical Sciences., 24, 169, 2005
  30. Han BH, Han BH, Elements of X-ray Diffraction, Dongmyungsa, Seoul, 231, 2003
  31. Cullity BD, Stock SR, Elements of X-ray Diffraction, 3 rd ed., Prentice Hall, New Jersey, 167, 2001
  32. Fell JT, Newton JM, J. Pharm. Sci., 59, 688, 1970
  33. Shioji Y, Manufacture Technology of Solid Tablet, CMC, Tokyo, Japan, 11-14, 64-66, 2003
  34. Box GEP, Behnken DW, Technometrics., 2(4), 455, 1960
  35. Song, R. K., SAS/STAT Regression, 3rd ed., Freedom Academy, Pajoo, 141, 2004
  36. Sim CH, J. Kor. Pharm. Sci., 38(1), 1, 2008
  37. Hancock BC, Colvin JT, Mullarnaney MP, Zinchuk AV, Pharm. Technol., 27, 64, 2003
[Cited By]
  1. Baek J, Lee G, Korean Chemical Engineering Research, 52(5), 564, 2014
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.