Search / Korean Journal of Chemical Engineering
Korean Chemical Engineering Research
ISSN 0304-128X
Volume 45, Number 1
Korean Chem. Eng. Res. 45(1), 1-108
February, 2007
15 articles Entire volume, number list
1-11 NPK 비료 생산을 위한 6구역 모사이동층의 공정모사
Simulation of a Six-zone Simulated Moving Bed Chromatographic Process for NPK Fertilizer Production

임영일, 이아란
12-16 메탄올 자열 개질 반응기에서의 온도제어
Temperature Control in Autothermal Reforming Reactor

김송주, 남지훈, 이지태, 김동현
17-24 제지공정 건조 실린더의 모델링 및 모사
Modeling and Simulation of Drying Cylinders in Paper Processes

이은호, 곽기영, 여영구
25-31 석유화학단지 수소 재활용 최적 네트워크 설계
Optimal Hydrogen Recycling Network Design of Petrochemical Complex

정창현, 이철진, 김대현, 한종훈
32-38 다축-다변량회귀분석 기법을 이용한 회분식 공정의 이상감지 및 통계적 제어 방법
Fault Detection & SPC of Batch Process using Multi-way Regression Method

우경섭, 이창준, 한경훈, 고재욱, 윤인섭
39-45 분리벽형 증류탑의 구조 설계 및 분리 특성 연구
The Study of Structure Design for Dividing Wall Distillation Column

이승현, 이문용
46-51 초임계수 내에서 PCBs 완전산화반응의 전산모사에 관한 연구
A Study on the Computer Simulation for the Complete Combustion Reaction of PCBs in Supercritical Water

조정호, 김경숙, 손순환, 김영철
52-56 상업용 설계 프로그램을 이용한 TAME 공정의 설계
Design of TAME Process using a Commercial Design Software

황규석, 이문용, 김영한
57-66 Methane으로부터 13C 동위원소 분리를 위한 회분식 및 연속식 극저온 증류공정모사 비교 연구
A Comparison Study between Batch and Continuous Process Simulation for the Separation of Carbon-13 Isotope by Cryogenic Distillation

김종환, 이덕형, 이의수, 박상진
67-72 MISO 고차 ARX 모델 기반의 MIMO 상태공간 모델의 모델인식: 설계와 적용
Identification of MIMO State Space Model based on MISO High-order ARX Model:Design and Application

원왕연, 윤지은, 이광순, 이봉국
73-80 연속 회분식 반응기에서 최적 질소 제거를 위한 최적 궤적 찾기와 재최적화
Optimal Trajectory Finding and re-optimization of SBR for Nitrogen Removal

김영황, 유창규, 이인범
81-86 SO2 제거를 위한 중공사막 기-액 접촉기의 모사 및 분리막 물질 전달 계수 추정
The Computer Simulation and Estimation of Membrane Mass Transfer Coefficients of Hollow Fiber Membrane G-L Contactors for SO2 Removal

김용국, 송희열, 이형근, 김인원
87-92 다변량 통계 분석을 이용한 결측 데이터의 예측과 센서이상 확인
Missing Value Estimation and Sensor Fault Identification using Multivariate Statistical Analysis

이창규, 이인범
93-102 직접 메탄올 연료전지 유로 설계를 위한 3차원 모델 개발
Development of 3D DMFC Model for Flow Field Design

김홍성, Danilov VA, 임종구, 문일
103-108 중·소 화학공장에 적합한 위험성 평가 기법 개발에 관한 연구
A Study on Hazard Identification Method for Small and Medium Chemical Industries

이재민, 유진환, 고재욱