Search / Korean Journal of Chemical Engineering
Korean Chemical Engineering Research,
Vol.59, No.2, 174-179, 2021
Fabrication of K-PHI Zeolite Coated Alumina Hollow Fiber Membrane and Study on Removal Characteristics of Metal Ions in Lignin Wastewater
Recently, hybrid coal research is underway to upgrade low-grade coal. The hybrid coal is made by mixing low-grade coal with bioliquids such as molasses, sugar cane, and lignin. In the case of lignin used here, a large amount of lignin is included in the wastewater of the papermaking process, and thus, research on hybrid coal production using the same is attracting attention. However, since a large amount of metal ions are contained in the lignin wastewater from the papermaking process, substances that corrode the generator are generated during combustion, and the amount of fly ash is increased. To solve this problem, it is essential to remove metal ions in the lignin wastewater. In this study, metal ions were removed by ion exchange with a alumina hollow fiber membrane coated with K-Phillipsite (K-PHI) zeolite. The alumina hollow fiber membrane used as the support was prepared by the nonsolvent induced phase separation (NIPS) method, and K-PHI seeds were prepared by hydrothermal synthesis. The prepared K-PHI seed was seeded on the surface of the support and coated by secondary growth hydrothermal synthesis. The characteristic of prepared coating membrane was analyzed by Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDX), and the concentration of metal ions before and after ion exchange was measured by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). The extraction amount of K+ is 86 mg/kg, and the extraction amount of Na+ is 54.9 mg/kg. Therefore, K-PHI zeolite membrane has the potential to remove potassium and sodium ions from the solution and can be used in acidic lignin wastewater.
[References]
  1. Christopher H, Zhu Y, Environ. Sci. Technol., 40, 1693, 2006
  2. Umar DF, Usui H, Daulay B, Fuel Process. Technol., 87(11), 1007, 2006
  3. Yoshida T, Takanohashi T, Sakanishi K, Saito I, Fujita M, Mashimo K, Fuel, 81(11-12), 1463, 2002
  4. Yoshida T, Takanohashi T, Saito I, Fuel, 86(1), 61, 2004
  5. Wang YF, Lin F, Pang WQ, J. Hazard. Mater., 160(2-3), 371, 2008
  6. Sakanishi K, Akashi E, Nakazato T, Tao H, Kawashima H, Saito I, Takarada T, Fuel, 83(6), 739, 2004
  7. Yuan JS, Chen QM, Wang JK, Transp. Porous Media., 72, 71, 2008
  8. Zhao YF, Zhang B, Zhang X, Wang JH, Liu JD, Chen RF, J. Hazard. Mater., 178(1-3), 658, 2010
  9. Chen W, Guo Q, Yang C, Hou J, J. Porous. Mat., 25(1), 215, 2018
  10. Yuan JS, Zhao YY, Li QH, Ji ZY, Guo XF, Sep. Purif. Technol., 99, 55, 2012
  11. Xu XC, Yang WS, Liu J, Lin LW, Stroh N, Brunner H, J. Membr. Sci., 229(1-2), 81, 2004
  12. Hou J, Yuan JS, Xu J, Sun L, Microporous Mesoporous Mater., 172, 217, 2013
  13. Khayet M, Matsuura T, Membrane Distillation: Principles and Applications, Elsevier, Oxford, U.K. (2011).
  14. Zou L, Gusnawan P, Jiang YB, Zhang G, Yu J, ACS Appl. Mater. Interfaces, 12, 28655, 2020
  15. Lee DW, Bae JS, Lee YJ, Park SJ, Hong JC, Lee BH, Jeon CH, Choi YC, Environ. Sci. Technol., 47, 1704, 2013