Search / Korean Journal of Chemical Engineering
Total 11 articles [ 키워드: Finite Element Method ]
No. Article
1 Korean Chemical Engineering Research, 55 (4), pp.561-566 (2017)
굴곡 융착면을 이용한 고밀도폴리에틸렌 관의 버트 융착 공정에서의 열유체 거동 수치모사
Numerical Simulation of Heat and Flow Behaviors in Butt-fusion Welding Process of HDPE Pipes with Curved Fusion Surface

유재현, 최선웅, 안경현, et al.
2 Korean Chemical Engineering Research, 47 (3), pp.344-348 (2009)
리튬 이온 폴리머 전지의 사이클 수명 모델링
Modeling of the Cycle Life of a Lithium-ion Polymer Battery

김의성, 이정빈, 이재신, et al.
3 Korean Chemical Engineering Research, 47 (1), pp.72-78 (2009)
전기전도성 이방성 복합재료 방전가공의 수치 해석
Numerical Analysis of the Electro-discharge Machining Process of a Conductive Anisotropic Composite

안영철, 천갑제
4 Korean Chemical Engineering Research, 45 (3), pp.242-248 (2007)
차량용 12-V 납축전지의 충·방전 모델링
Modeling of the Charge-discharge Behavior of a 12-V Automotive Lead-acid Battery

김의성, 전세훈, 전원진, et al.
5 HWAHAK KONGHAK, 39 (6), pp.673-677 (2001)
전기적 임피던스 단층 촬영 기법을 이용한 이상 유동 가시화
Two Phase Flow Visualization by Employing Electrical Impedance Tomography Technique

김민찬, 김경연, 이헌주, et al.
6 HWAHAK KONGHAK, 38 (5), pp.603-608 (2000)
전기자동차의 축전지의 열적 특성 모델링
Modeling of the Thermal Behavior of an Electric-Vehicle Battery

윤창연, 신치범, 양철남, et al.
7 HWAHAK KONGHAK, 37 (2), pp.219-228 (1999)
충전층 흡착관내에서 입상활성탄에 의한 페놀류의 제거
Removal of Phenols by Granular Activated Carbon in Packed-Bed Adsorption Column

윤영삼
8 HWAHAK KONGHAK, 35 (6), pp.850-855 (1997)
알루미나-탄화티타늄 복합체 방전가공의 수치해석 Ⅰ.정상상태 해석
Numerical Analysis of the Electro-discharge Machining Process for Alumina-Titanium Carbonate Composite

안영철, 정영습, 왕덕현, et al.
9 HWAHAK KONGHAK, 35 (5), pp.705-711 (1997)
입상활성탄에 의한 물 중의 페놀의 제거: 매개변수 추정
Removal of Phenol in Water by Granular Activated Carbon: Parameter Estimation

윤영삼, 권성헌, 변윤섭, et al.
10 HWAHAK KONGHAK, 35 (5), pp.717-723 (1997)
촉매 충전층 반응기에 대한 매개변수 감응도 및 온도 일방 질주 현상 해석
Analysis of Parametric Sensitivity and Temperature Runaway Phenomena in catalytic Fixed-Bed Reactor

윤영삼, 박판욱, 정용옥, et al.
1 [2]