|
Search / Korean Journal of Chemical Engineering
|
Total 29 articles [ 저자: 이기준 ] |
No. |
Article |
1 |
Korean Chemical Engineering Research, 50 (3), pp.479-491 (2012) 계통한계가격 예측모델에 근거한 통합 지역난방 시스템의 최적화 Optimization of Integrated District Heating System (IDHS) Based on the Forecasting Model for System Marginal Prices (SMP) 이기준, 김래현, 여영구 |
2 |
HWAHAK KONGHAK, 35 (5), pp.690-697 (1997) 유도시간이 포함된 불포화 폴리에스터의 라디칼 매커니즘에 기초한 경화 반응 해석 연구 Cure Kinetic Analysis of Free Radical Polymerization of Unsaturated Polyester Resin Exhibiting Induction Periods 윤영민, 이기준, 오경성, et al. |
3 |
HWAHAK KONGHAK, 35 (4), pp.468-475 (1997) 섬유 강화 사출성형품의 뒤틀림 현상 해석 An Analysis of the Warpage Phenomena of the Fiber-Reinforced Injection Molded Parts 민남홍, 김성우, 박찬석, et al. |
4 |
HWAHAK KONGHAK, 35 (3), pp.425-432 (1997) 굳힘 압력을 적용한 수지이동성형 공정에 관한 연구 A Study on the Resin Transfer Molding Process under Controlled Consolidation Pressure 김성우, 남재도, 이기준 |
5 |
HWAHAK KONGHAK, 32 (2), pp.159-168 (1994) 사출성형공정에서의 단섬유배향에 관한 수치 및 실험 연구 Numerical and Experimental Study on the short Fiber Orientation in Injection Molding Process 이미혜, 이기준 |
6 |
HWAHAK KONGHAK, 31 (4), pp.430-438 (1993) 평판형 die내를 흐르는 단섬유 현탁계의 섬유배향과 압출팽창에 관한 수치해석 A Numerical Analysis on the Fiber Orientation and Die Swell of the Fiber Suspensions in Slit Dies 이종훈, 박용민, 이기준 |
7 |
HWAHAK KONGHAK, 28 (6), pp.637-643 (1990) 전선이중피복용 동심압출 die내의 고분자 물질의 이동현상에 관한 유변학적 해석 Rheological Analysis of Polymeric Met Flow in a Coextrusion Wire Coating Die 박용민, 박헌진, 이기준 |
8 |
HWAHAK KONGHAK, 27 (4), pp.579-587 (1989) 사출성형 고분자물질의 공동충전현상에 관한 유변학적 해석 Rheological Analysis of an Injection Mold Filling Process of a Viscoelastic fluid 이기준, 정광식, 서문호 |
9 |
HWAHAK KONGHAK, 25 (3), pp.217-227 (1987) Epoxy 반응사출성형의 환상공동내 충전과 경화공정에 대한 수치모사 연구 Numerical Simulation of Annular Cavity Filling and Curing in an Epoxy RIM Process 정호갑, 박헌진, 이기준 |
10 |
HWAHAK KONGHAK, 24 (6), pp.433-441 (1986) 원통관들을 직교하는 점성류의 유동현상에 관한 수치모사 연구 A Numerical Study of the Viscous Flow Across the Cylinder Arrays 정건용, 이형만, 이기준 |
|
|