건축물 내부의 장식을 위해 사용되는 MDF합판은 화염의 착화를 지연시키기 위해 방염처리하도록 규정하고 있어 일반적으로 방염도료나 방염액 또는 방염필름 등을 적용하여 착화를 지연시키는데 이 때 적용하는 시료에 따라 방염 성능과 연소 시 발생되는 가스의 유독성의 차이가 발생할 수 있어 본 연구에서는 MDF에 적용된 방염시료들의 방염성능 및 연소특성에 대해 비교분석하였으며 그 결과 방염성능에 부합하는 제품이 확인되었으나 방염처리방법에 따라 방염성능의 차이가 존재함을 확인할 수 있었으며 연소과정에서 발생되어지는 여러 종류의 유독가스의 영향도 함께 고려해야 할 요소임을 확인할 수 있었다.
Interior of the building is used as a MDF plywood if there is a fire in order to delay the ignition, flame retardant paint, flame retardant solution and flame retardant film are being handled by the flame retardant. Combustion characteristics anf flame retardant performance results can be summarized as follows: General film with a sample showed that short of the criteria in terms of carbonation area, and the results of flame retardant paint, flame retardant solution and flame retardant film products satisfied the criteria. Toxic gases generated in the combustion process results in a film samples using a high incidence of carbon monoxide and the creation of a smoke could be seen. This confirm that is estimated that result from incomplete combustion of PVC film that attach, and displays high toxicity index and hazard class relatively.
Dobele G, Urbanovich I, Zhurins A, Kampars V, Meier
D, J. Anal. Appl. Pyrolysis, 79, 47, 2007
Grexa O, Lubke H, “Flammability Parameters of Wood
Tested on a Cone Calorimeter,” Polym. Degrad. Stab. 427-432, 2001
Lim NG, Her JW, Park CW, J. of Korean Institute of Build. Constuct., 8(6), 117, 2008
Lee JW, “Burning Behavior of Interior Materials in the Cone
Calorimeter and Evaluation of Toxic of Smoking,” M. D. thesis,
Bukyung University, Busan, 2008
Kang SD, “Experimental Study on the Toxic Gases Released
from the Floor Finishing Materials in Entertainment Service Industry
Buildings,” M. D. thesis, Seoul city University, Seoul, 2002
National Emergency Management Agency, Notice no. 2012-
114, “Performance Standard of Flame Retardant”.
National Emergency Management Agency, Notice no. 2009-31,
“Technical Standards of Flame Retardant Product Performance”.
DS 02-713(Defence Standard 02-713), “Determination of the
Toxicity Index of the Products of Combustion from Small Specimens
of Materials; Issue 2”, 2002