|
|
| Total 6 articles [ 키워드: Extrusion ] |
| No. |
Article |
| 1 |
Korean Chemical Engineering Research, 52 (2), pp.261-265 (2014)
(활성탄/고분자바인더)복합성형체의 압출온도에 따르는 응집구조 및 유량 상관성에 관한 연구
Study on the Relationship between Aggregation Structure and Flow Rate Depending on Extrusion Temperature at Complex Mold of (Activated Carbon/Polymer Binder)
임용균, 김영준, 박상진, et al. |
| 2 |
Korean Chemical Engineering Research, 51 (3), pp.352-357 (2013)
정수장 슬러지로부터 제조한 입상흡착제의 염기성 가스 흡착 성능
Adsorption Performance of Basic Gas over Pellet-type Adsorbents Prepared from Water Treatment Sludge
배정현, 박나영, 이철호, et al. |
| 3 |
Korean Chemical Engineering Research, 51 (3), pp.382-387 (2013)
생분해성 폴리우레탄/클레이 나노복합 필름의 제조 및 특성 연구
Preparation and Characteristics of Biodegradable Polyurethane/Clay Nanocomposite Films
김성우 |
| 4 |
Korean Chemical Engineering Research, 50 (6), pp.1068-1075 (2012)
PBT와 Nylon6,12의 블렌드 특성과 core/shell 구조를 갖는 PBT/Nylon6,12 미세모의 제조 및 압출조건
Blend Characteristics of PBT, Nylon6,12 and Preparation of PBT/Nylon6,12 Micro Fiber with Core/shell Structure and their Extrusion Conditions
박희만, 이선호, 곽노석, et al. |
| 5 |
Korean Chemical Engineering Research, 49 (6), pp.726-731 (2011)
Fischer-Tropsch 반응용 Fe계 압출성형촉매 제조에서의 바인더의 영향
Influence of Binder on Fe-based Extrudate as Fischer-Tropsch Catalysts
서정환, 채호정, 김태완, et al. |
| 6 |
Korean Chemical Engineering Research, 49 (2), pp.206-210 (2011)
다양한 방식의 등통로각압축공정으로 가공된 Poly(lactic acid) 시편들의 열 및 기계적 물성
Thermal and Mechanical Properties of Poly(lactic acid) Specimens Fabricated by Various Equal-channel Angular Extrusion Processes
류욱연, 정시인, 최호석, et al. |
|
|
